***Lead Time: 3 weeks***
Cold therapy enthusiasts, whether beginners or experts, typically engage in this practice for its health benefits rather than the strenuous task of hauling ice. Managing the ice required for a cold bath can become overwhelming. Our chiller eliminates the effort, enabling more consistent and regular use of your ice bath, transforming it into a hassle-free, iceless experience.
Able to cool water to the low 40s°F, and even into the high 30s°F under optimal conditions, this chiller combats the primary heat sources affecting a cold therapy tub: ambient temperature and direct sunlight. While your body heat contributes minimally, minimizing external heat exposure can enhance the chiller's efficiency. Expect achievable temperatures in the low to mid-40s°F in most situations, including up to +/-100 gallons of water in full sun or less-than-ideal conditions. Suitable for both indoor and outdoor use, barring freezing temperatures, our chiller adapts to various settings.
Running Costs (more affordable than anticipated):
With electricity rates at $0.12/KWh, the monthly operational cost ranges from approximately $18 to $28. The system's compressor and fan activate only when needed, switching off upon reaching the desired temperature, leaving only the low-wattage pump running continuously.
Regarding inquiries about using timers: it’s beneficial to maintain a consistently cold water temperature. Cold water restricts bacterial growth, reducing maintenance and the frequency of water changes. This also allows for lower concentrations of sanitizers to be effective. Regular usage negates significant power savings, as the energy to cool down water after "off" periods will still be expended, thus, the savings might only be $3 to $5 monthly. Additionally, frequent water changes and filter replacements could outweigh these minor savings.
Continuously powering the chiller is also kinder to the pump, as the most wear occurs at startup, and power cycling adds undue stress, potentially leading to failures.
*Installation note: Your setup should allow for gravity priming to the pump, as it cannot self-prime. Position the chiller no more than 3 feet from your tub's drain and at an equal or lower height—avoid placing it above the tub level. Excessive tubing length from the tub's drain to the chiller inlet might impede adequate water flow, straining the pump.
Specifications:
- 3/4HP High Efficiency Chiller
- 7,500 BTU/hr
- 56 dBA (fairly quiet)
- 110 – 120 Volts / 450 Watts / 3.9 Amps
- 17”W x 15”D x 13”H
- 49 Pounds
- Built in Pump
- 10' power cord with GFCI protection
- Rain Proof* (*disconnect chiller and drain completely when ambient temps are freezing or below to prevent damage to chiller)
- 1 Year Product Warranty
- Proudly made in the USA
***Lead Time: 3 weeks***
Cold therapy enthusiasts, whether beginners or experts, typically engage in this practice for its health benefits rather than the strenuous task of hauling ice. Managing the ice required for a cold bath can become overwhelming. Our chiller eliminates the effort, enabling more consistent and regular use of your ice bath, transforming it into a hassle-free, iceless experience.
Able to cool water to the low 40s°F, and even into the high 30s°F under optimal conditions, this chiller combats the primary heat sources affecting a cold therapy tub: ambient temperature and direct sunlight. While your body heat contributes minimally, minimizing external heat exposure can enhance the chiller's efficiency. Expect achievable temperatures in the low to mid-40s°F in most situations, including up to +/-100 gallons of water in full sun or less-than-ideal conditions. Suitable for both indoor and outdoor use, barring freezing temperatures, our chiller adapts to various settings.
Running Costs (more affordable than anticipated):
With electricity rates at $0.12/KWh, the monthly operational cost ranges from approximately $18 to $28. The system's compressor and fan activate only when needed, switching off upon reaching the desired temperature, leaving only the low-wattage pump running continuously.
Regarding inquiries about using timers: it’s beneficial to maintain a consistently cold water temperature. Cold water restricts bacterial growth, reducing maintenance and the frequency of water changes. This also allows for lower concentrations of sanitizers to be effective. Regular usage negates significant power savings, as the energy to cool down water after "off" periods will still be expended, thus, the savings might only be $3 to $5 monthly. Additionally, frequent water changes and filter replacements could outweigh these minor savings.
Continuously powering the chiller is also kinder to the pump, as the most wear occurs at startup, and power cycling adds undue stress, potentially leading to failures.
*Installation note: Your setup should allow for gravity priming to the pump, as it cannot self-prime. Position the chiller no more than 3 feet from your tub's drain and at an equal or lower height—avoid placing it above the tub level. Excessive tubing length from the tub's drain to the chiller inlet might impede adequate water flow, straining the pump.
Specifications:
- 3/4HP High Efficiency Chiller
- 7,500 BTU/hr
- 56 dBA (fairly quiet)
- 110 – 120 Volts / 450 Watts / 3.9 Amps
- 17”W x 15”D x 13”H
- 49 Pounds
- Built in Pump
- 10' power cord with GFCI protection
- Rain Proof* (*disconnect chiller and drain completely when ambient temps are freezing or below to prevent damage to chiller)
- 1 Year Product Warranty
- Proudly made in the USA
Authorized Dealer - Full Warranty Included
